The NYYCUK tuning fork level switch is a universal liquid level limit switch. The tuning fork is excited by a piezoelectric crystal to generate vibration. When the tuning fork is immersed in liquid or solid, the vibration frequency changes. This frequency change is detected by an electronic circuit as a switching value. The tuning fork type liquid level limit switch is not affected by the dielectric constant, turbulence, agitation, bubbles, vibration and other factors, and has no moving parts. Therefore, it does not need maintenance and adjustment. It is an ideal choice for liquid level switches under complex working conditions. The latest smart chip can be used as the oil-water interface switch.
Tuning fork level switch is widely used in liquid medium limit monitoring such as tap water, mineral water, gasoline, diesel, paper pulp, glue, waste water, dye, acid and alkali solution, beer, beverage, etc., as well as solid powder and small solid particles with good flow.
Note: The products can be customized and designed according to the specific requirements of users!
NYYCUK-ATuning Fork Level Switch Design Features
◎ Suitable for measuring medium density solid powder or particle that can flow freely. It is also applicable to almost all liquid media. This series of tuning fork level switches can measure a variety of material levels, with high/low fault safety limit switches, overflow or idling protection, pump control, and display whether there is/is no flow in the pipeline.
◎ It is not affected by foam, vortex and gas, and is suitable for fixed point alarm or control of solid material level in various bins and liquid level in various containers. A variety of models can be suitable for different occasions.
Long service life, stable performance, safety and reliability
◎ Strong adaptability - different electrical parameters and densities of the measured materials will not affect the measurement. Severe conditions such as scaling, agitation, turbulence, bubbles, vibration, medium viscosity, high temperature and high pressure also have no effect on the detection.
◎ No need for adjustment: it is not affected by the dielectric constant and density of the measured medium, so no matter what kind of liquid is measured, it does not need to be adjusted on site.
◎ Maintenance free: the testing process of tuning fork switch is completed by electronic circuit, and there are no moving parts. Once it is installed and put into operation, it does not need to be adjusted on site.
